17 research outputs found

    Synthesis of pillared clays from metallic salts as pigments for thermosolar absorptive coatings

    Get PDF
    [EN] A general procedure for developing stable solar absorptive coatings at both high temperature and a high solar radiation concentration is presented. In order to generally improve thermal efficiency, a coating with high solar absorptance is applied all over the surface of receiver tubes that is subjected to extreme working conditions. Consequently, a durable coating with high absorptivity for sunlight is needed. An alternative paint formulation research and development line to Pyromark-2500, the paint currently used in many commercial solar thermal power plants (CSP) is proposed. Pigment synthesis is developed by intercalating metallic salts into laminar or tubular clay structures. Metallic pxides, which provide paint with its color properties, are obtained by a calcination process. Addition of silane or surfactants during the pigment synthesis is also optimized. Once dried and ground to a precise size, pigments are mixed with a commercial binder and applied to a metallic substrate to study their properties. Thermal stability to high temperature is studied with different tests. The results showed that laminar structure was preferred to intercalate larger amounts of metallic salt into the clay structure, and no significant differences were found when using silane or surfactant modifiers. Although the highest absorptivity value was 85% after 24 h at 600 degrees C, samples presented very good adherence to the metallic substrate. Addition of a small quantity of commercial black pigment to the paint composition could improve the absorptivity and maintain the excellent adhesion shown. Furthermore, montmorillonite clay, modified with a surfactant before adding metallic salt, and without silane, resulted in a black pigment in a powder form. This pillared clay could be used in future paint formulations. (C) 2017 Elsevier Ltd. All rights reserved.The research that has led to these results was funded by Abengoa Solar New Technologies S.A. by a private contract with the Colour and Vision Group of the University of Alicante.Micó Vicent, B.; López-Herraiz, M.; Bello, A.; Martínez, N.; Martinez-Verdu, FM. (2017). Synthesis of pillared clays from metallic salts as pigments for thermosolar absorptive coatings. Solar Energy. 155:314-322. doi:10.1016/j.solener.2017.06.034S31432215

    Effect of surgical experience and spine subspecialty on the reliability of the {AO} Spine Upper Cervical Injury Classification System

    Get PDF
    OBJECTIVE The objective of this paper was to determine the interobserver reliability and intraobserver reproducibility of the AO Spine Upper Cervical Injury Classification System based on surgeon experience (< 5 years, 5–10 years, 10–20 years, and > 20 years) and surgical subspecialty (orthopedic spine surgery, neurosurgery, and "other" surgery). METHODS A total of 11,601 assessments of upper cervical spine injuries were evaluated based on the AO Spine Upper Cervical Injury Classification System. Reliability and reproducibility scores were obtained twice, with a 3-week time interval. Descriptive statistics were utilized to examine the percentage of accurately classified injuries, and Pearson’s chi-square or Fisher’s exact test was used to screen for potentially relevant differences between study participants. Kappa coefficients (κ) determined the interobserver reliability and intraobserver reproducibility. RESULTS The intraobserver reproducibility was substantial for surgeon experience level (< 5 years: 0.74 vs 5–10 years: 0.69 vs 10–20 years: 0.69 vs > 20 years: 0.70) and surgical subspecialty (orthopedic spine: 0.71 vs neurosurgery: 0.69 vs other: 0.68). Furthermore, the interobserver reliability was substantial for all surgical experience groups on assessment 1 (< 5 years: 0.67 vs 5–10 years: 0.62 vs 10–20 years: 0.61 vs > 20 years: 0.62), and only surgeons with > 20 years of experience did not have substantial reliability on assessment 2 (< 5 years: 0.62 vs 5–10 years: 0.61 vs 10–20 years: 0.61 vs > 20 years: 0.59). Orthopedic spine surgeons and neurosurgeons had substantial intraobserver reproducibility on both assessment 1 (0.64 vs 0.63) and assessment 2 (0.62 vs 0.63), while other surgeons had moderate reliability on assessment 1 (0.43) and fair reliability on assessment 2 (0.36). CONCLUSIONS The international reliability and reproducibility scores for the AO Spine Upper Cervical Injury Classification System demonstrated substantial intraobserver reproducibility and interobserver reliability regardless of surgical experience and spine subspecialty. These results support the global application of this classification system

    Thread Assignment in Multicore/Multithreaded Processors: A Statistical Approach

    Get PDF
    The introduction of multicore/multithreaded processors, comprised of a large number of hardware contexts (virtual CPUs) that share resources at multiple levels, has made process scheduling, in particular assignment of running threads to available hardware contexts, an important aspect of system performance. Nevertheless, thread assignment of applications running on state-of-the art processors is an NP-complete problem. Over the years, numerous studies have proposed heuristic-based algorithms for thread assignment. Since the thread assignment problem is intractable, it is in general impossible to know the performance of the optimal assignment, so the room for improvement of a given algorithm is also unknown. It is therefore hard to decide whether to invest more effort and time to improve an algorithm that may already be close to optimal. In this paper, we present a statistical approach to the thread assignment problem. First, we present a method that predicts the performance of the optimal thread assignment, based on the observed performance of each thread assignment in a random sample. The method is based on Extreme Value Theory (EVT), a branch of statistics that analyses extreme deviations from the population mean. We also propose sample pruning, a method that significantly reduces the time required to apply the statistical method by reducing the number of candidate solutions that need to be measured. Finally, we show that, if no suitable heuristic-based algorithm is available, a sample of several thousand random thread assignments is enough to obtain, with high confidence, an assignment with performance close to optimal. The presented approach is architecture and application independent, and it can be used to address the thread assignment problem in various domains. It is especially well suited for systems in which the workload seldom changes. An example is network systems, which typically provide a constant set of services that are known in advance, with network applications performing a similar processing algorithm for each packet in the system. In this paper, we validate our methods with an industrial case study for a set of multithreaded network applications on an UltraSPARC T2 processor. This article is an extension of our previous work [44] , which was published in Proceedings of 17th International Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS-2012).Peer Reviewe

    "Multidimensional Reflectometry for Industry" (xD-Reflect) a European research project

    Get PDF
    The European Metrology Research Program (EMRP) is a metrology-focused program of coordinated Research & Development (R&D) funded by the European Commission and participating countries within the European Association of National Metrology Institutes (EURAMET). It supports and ensures research collaboration between them by launching and managing different types of project calls. Within the EMRP Call 2012 "Metrology for Industry", the joint research project (JRP) entitled "Multidimensional Reflectometry for Industry" (xD-Reflect) was submitted by a consortium of 8 National Metrology Institutes (NMIs) and 2 universities and was subsequently funded. The general objective of xD-Reflect is to meet the demands from industry to describe the overall macroscopic appearance of modern surfaces by developing and improving methods for optical measurements which correlate with the visual sensation being evoked. In particular, the project deals with the "Goniochromatism", "Gloss" and "Fluorescence" properties of dedicated artifacts, which will be investigated in three main work packages (WP). Two additional transversal WP reinforce the structure: "Modelling and Data Analysis" with the objective to give an irreducible set of calibration schemes and handling methods and "Visual Perception", which will produce perception scales for the different visual attributes. Multidimensional reflectometry involves the enhancement of spectral and spatial resolution of reference gonioreflectometers for BRDF measurements using modern detectors, conoscopic optical designs, CCD cameras, line scan cameras, and modern light sources in order to describe new effects like sparkle and graininess/coarseness. More information and updated news concerning the project can be found on the xD-Reflect website http://www.xdreflect.eu/.status: publishe

    A simple algorithm for the identification of clinical COPD phenotypes

    No full text
    This study aimed to identify simple rules for allocating chronic obstructive pulmonary disease (COPD) patients to clinical phenotypes identified by cluster analyses.Data from 2409 COPD patients of French/Belgian COPD cohorts were analysed using cluster analysis resulting in the identification of subgroups, for which clinical relevance was determined by comparing 3-year all-cause mortality. Classification and regression trees (CARTs) were used to develop an algorithm for allocating patients to these subgroups. This algorithm was tested in 3651 patients from the COPD Cohorts Collaborative International Assessment (3CIA) initiative.Cluster analysis identified five subgroups of COPD patients with different clinical characteristics (especially regarding severity of respiratory disease and the presence of cardiovascular comorbidities and diabetes). The CART-based algorithm indicated that the variables relevant for patient grouping differed markedly between patients with isolated respiratory disease (FEV1, dyspnoea grade) and those with multi-morbidity (dyspnoea grade, age, FEV1 and body mass index). Application of this algorithm to the 3CIA cohorts confirmed that it identified subgroups of patients with different clinical characteristics, mortality rates (median, from 4% to 27%) and age at death (median, from 68 to 76 years).A simple algorithm, integrating respiratory characteristics and comorbidities, allowed the identification of clinically relevant COPD phenotypes.status: publishe
    corecore